This the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Extend Kubernetes

Understand advanced ways to adapt your Kubernetes cluster to the needs of your work environment.

1: Configure the Aggregation Layer
2: Use Custom Resources

2.1: Extend the Kubernetes API with CustomResourceDefinitions
2.2: Versions in CustomResourceDefinitions

3: Set up an Extension API Server
4: Configure Multiple Schedulers
5: Use an HTTP Proxy to Access the Kubernetes API
6: Set up Konnectivity service

1 - Configure the Aggregation Layer

Configuring the aggregation layer allows the Kubernetes apiserver to be extended with additional APIs, which are not part of the core Kubernetes APIs.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Note: There are a few setup requirements for getting the aggregation layer working in your environment to support mutual TLS auth between the proxy and extension apiservers. Kubernetes and the kube-apiserver have multiple CAs, so make sure that the proxy is signed by the aggregation layer CA and not by something else, like the Kubernetes general CA.

Caution: Reusing the same CA for different client types can negatively impact the cluster's ability to function. For more information, see CA Reusage and Conflicts.

Authentication Flow

Unlike Custom Resource Definitions (CRDs), the Aggregation API involves another server - your Extension apiserver - in addition to the standard Kubernetes apiserver. The Kubernetes apiserver will need to communicate with your extension apiserver, and your extension apiserver will need to communicate with the Kubernetes apiserver. In order for this communication to be secured, the Kubernetes apiserver uses x509 certificates to authenticate itself to the extension apiserver.

This section describes how the authentication and authorization flows work, and how to configure them.

The high-level flow is as follows:

Kubernetes apiserver: authenticate the requesting user and authorize their rights to the requested API path.
Kubernetes apiserver: proxy the request to the extension apiserver
Extension apiserver: authenticate the request from the Kubernetes apiserver
Extension apiserver: authorize the request from the original user
Extension apiserver: execute

The rest of this section describes these steps in detail.

The flow can be seen in the following diagram.

aggregation auth flows .

The source for the above swimlanes can be found in the source of this document.

Kubernetes Apiserver Authentication and Authorization

A request to an API path that is served by an extension apiserver begins the same way as all API requests: communication to the Kubernetes apiserver. This path already has been registered with the Kubernetes apiserver by the extension apiserver.

The user communicates with the Kubernetes apiserver, requesting access to the path. The Kubernetes apiserver uses standard authentication and authorization configured with the Kubernetes apiserver to authenticate the user and authorize access to the specific path.

For an overview of authenticating to a Kubernetes cluster, see "Authenticating to a Cluster". For an overview of authorization of access to Kubernetes cluster resources, see "Authorization Overview".

Everything to this point has been standard Kubernetes API requests, authentication and authorization.

The Kubernetes apiserver now is prepared to send the request to the extension apiserver.

Kubernetes Apiserver Proxies the Request

The Kubernetes apiserver now will send, or proxy, the request to the extension apiserver that registered to handle the request. In order to do so, it needs to know several things:

How should the Kubernetes apiserver authenticate to the extension apiserver, informing the extension apiserver that the request, which comes over the network, is coming from a valid Kubernetes apiserver?
How should the Kubernetes apiserver inform the extension apiserver of the username and group for which the original request was authenticated?

In order to provide for these two, you must configure the Kubernetes apiserver using several flags.

Kubernetes Apiserver Client Authentication

The Kubernetes apiserver connects to the extension apiserver over TLS, authenticating itself using a client certificate. You must provide the following to the Kubernetes apiserver upon startup, using the provided flags:

private key file via --proxy-client-key-file
signed client certificate file via --proxy-client-cert-file
certificate of the CA that signed the client certificate file via --requestheader-client-ca-file
valid Common Name values (CNs) in the signed client certificate via --requestheader-allowed-names

The Kubernetes apiserver will use the files indicated by --proxy-client-*-file to authenticate to the extension apiserver. In order for the request to be considered valid by a compliant extension apiserver, the following conditions must be met:

The connection must be made using a client certificate that is signed by the CA whose certificate is in --requestheader-client-ca-file.
The connection must be made using a client certificate whose CN is one of those listed in --requestheader-allowed-names.

Note: You can set this option to blank as --requestheader-allowed-names="". This will indicate to an extension apiserver that any CN is acceptable.

When started with these options, the Kubernetes apiserver will:

Use them to authenticate to the extension apiserver.
Create a configmap in the kube-system namespace called extension-apiserver-authentication, in which it will place the CA certificate and the allowed CNs. These in turn can be retrieved by extension apiservers to validate requests.

Note that the same client certificate is used by the Kubernetes apiserver to authenticate against all extension apiservers. It does not create a client certificate per extension apiserver, but rather a single one to authenticate as the Kubernetes apiserver. This same one is reused for all extension apiserver requests.

Original Request Username and Group

When the Kubernetes apiserver proxies the request to the extension apiserver, it informs the extension apiserver of the username and group with which the original request successfully authenticated. It provides these in http headers of its proxied request. You must inform the Kubernetes apiserver of the names of the headers to be used.

the header in which to store the username via --requestheader-username-headers
the header in which to store the group via --requestheader-group-headers
the prefix to append to all extra headers via --requestheader-extra-headers-prefix

These header names are also placed in the extension-apiserver-authentication configmap, so they can be retrieved and used by extension apiservers.

Extension Apiserver Authenticates the Request

The extension apiserver, upon receiving a proxied request from the Kubernetes apiserver, must validate that the request actually did come from a valid authenticating proxy, which role the Kubernetes apiserver is fulfilling. The extension apiserver validates it via:

Retrieve the following from the configmap in kube-system, as described above:
- Client CA certificate
- List of allowed names (CNs)
- Header names for username, group and extra info
Check that the TLS connection was authenticated using a client certificate which:
- Was signed by the CA whose certificate matches the retrieved CA certificate.
- Has a CN in the list of allowed CNs, unless the list is blank, in which case all CNs are allowed.
- Extract the username and group from the appropriate headers

If the above passes, then the request is a valid proxied request from a legitimate authenticating proxy, in this case the Kubernetes apiserver.

Note that it is the responsibility of the extension apiserver implementation to provide the above. Many do it by default, leveraging the k8s.io/apiserver/ package. Others may provide options to override it using command-line options.

In order to have permission to retrieve the configmap, an extension apiserver requires the appropriate role. There is a default role named extension-apiserver-authentication-reader in the kube-system namespace which can be assigned.

Extension Apiserver Authorizes the Request

The extension apiserver now can validate that the user/group retrieved from the headers are authorized to execute the given request. It does so by sending a standard SubjectAccessReview request to the Kubernetes apiserver.

In order for the extension apiserver to be authorized itself to submit the SubjectAccessReview request to the Kubernetes apiserver, it needs the correct permissions. Kubernetes includes a default ClusterRole named system:auth-delegator that has the appropriate permissions. It can be granted to the extension apiserver's service account.

Extension Apiserver Executes

If the SubjectAccessReview passes, the extension apiserver executes the request.

Enable Kubernetes Apiserver flags

Enable the aggregation layer via the following kube-apiserver flags. They may have already been taken care of by your provider.

--requestheader-client-ca-file=<path to aggregator CA cert>
--requestheader-allowed-names=front-proxy-client
--requestheader-extra-headers-prefix=X-Remote-Extra-
--requestheader-group-headers=X-Remote-Group
--requestheader-username-headers=X-Remote-User
--proxy-client-cert-file=<path to aggregator proxy cert>
--proxy-client-key-file=<path to aggregator proxy key>

CA Reusage and Conflicts

The Kubernetes apiserver has two client CA options:

--client-ca-file
--requestheader-client-ca-file

Each of these functions independently and can conflict with each other, if not used correctly.

--client-ca-file: When a request arrives to the Kubernetes apiserver, if this option is enabled, the Kubernetes apiserver checks the certificate of the request. If it is signed by one of the CA certificates in the file referenced by --client-ca-file, then the request is treated as a legitimate request, and the user is the value of the common name CN=, while the group is the organization O=. See the documentation on TLS authentication.
--requestheader-client-ca-file: When a request arrives to the Kubernetes apiserver, if this option is enabled, the Kubernetes apiserver checks the certificate of the request. If it is signed by one of the CA certificates in the file reference by --requestheader-client-ca-file, then the request is treated as a potentially legitimate request. The Kubernetes apiserver then checks if the common name CN= is one of the names in the list provided by --requestheader-allowed-names. If the name is allowed, the request is approved; if it is not, the request is not.

If both --client-ca-file and --requestheader-client-ca-file are provided, then the request first checks the --requestheader-client-ca-file CA and then the --client-ca-file. Normally, different CAs, either root CAs or intermediate CAs, are used for each of these options; regular client requests match against --client-ca-file, while aggregation requests match against --requestheader-client-ca-file. However, if both use the same CA, then client requests that normally would pass via --client-ca-file will fail, because the CA will match the CA in --requestheader-client-ca-file, but the common name CN= will not match one of the acceptable common names in --requestheader-allowed-names. This can cause your kubelets and other control plane components, as well as end-users, to be unable to authenticate to the Kubernetes apiserver.

For this reason, use different CA certs for the --client-ca-file option - to authorize control plane components and end-users - and the --requestheader-client-ca-file option - to authorize aggregation apiserver requests.

Warning: Do not reuse a CA that is used in a different context unless you understand the risks and the mechanisms to protect the CA's usage.

If you are not running kube-proxy on a host running the API server, then you must make sure that the system is enabled with the following kube-apiserver flag:

--enable-aggregator-routing=true

Register APIService objects

You can dynamically configure what client requests are proxied to extension apiserver. The following is an example registration:


apiVersion: apiregistration.k8s.io/v1
kind: APIService
metadata:
  name: <name of the registration object>
spec:
  group: <API group name this extension apiserver hosts>
  version: <API version this extension apiserver hosts>
  groupPriorityMinimum: <priority this APIService for this group, see API documentation>
  versionPriority: <prioritizes ordering of this version within a group, see API documentation>
  service:
    namespace: <namespace of the extension apiserver service>
    name: <name of the extension apiserver service>
  caBundle: <pem encoded ca cert that signs the server cert used by the webhook>

The name of an APIService object must be a valid path segment name.

Contacting the extension apiserver

Once the Kubernetes apiserver has determined a request should be sent to an extension apiserver, it needs to know how to contact it.

The service stanza is a reference to the service for an extension apiserver. The service namespace and name are required. The port is optional and defaults to 443.

Here is an example of an extension apiserver that is configured to be called on port "1234", and to verify the TLS connection against the ServerName my-service-name.my-service-namespace.svc using a custom CA bundle.

apiVersion: apiregistration.k8s.io/v1
kind: APIService
...
spec:
  ...
  service:
    namespace: my-service-namespace
    name: my-service-name
    port: 1234
  caBundle: "Ci0tLS0tQk...<base64-encoded PEM bundle>...tLS0K"
...

What's next

Setup an extension api-server to work with the aggregation layer.
For a high level overview, see Extending the Kubernetes API with the aggregation layer.
Learn how to Extend the Kubernetes API Using Custom Resource Definitions.

2 - Use Custom Resources

2.1 - Extend the Kubernetes API with CustomResourceDefinitions

This page shows how to install a custom resource into the Kubernetes API by creating a CustomResourceDefinition.

Before you begin

Your Kubernetes server must be at or later than version 1.16. To check the version, enter kubectl version. If you are using an older version of Kubernetes that is still supported, switch to the documentation for that version to see advice that is relevant for your cluster.

Create a CustomResourceDefinition

When you create a new CustomResourceDefinition (CRD), the Kubernetes API Server creates a new RESTful resource path for each version you specify. The CRD can be either namespaced or cluster-scoped, as specified in the CRD's scope field. As with existing built-in objects, deleting a namespace deletes all custom objects in that namespace. CustomResourceDefinitions themselves are non-namespaced and are available to all namespaces.

For example, if you save the following CustomResourceDefinition to resourcedefinition.yaml:

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  # name must match the spec fields below, and be in the form: <plural>.<group>
  name: crontabs.stable.example.com
spec:
  # group name to use for REST API: /apis/<group>/<version>
  group: stable.example.com
  # list of versions supported by this CustomResourceDefinition
  versions:
    - name: v1
      # Each version can be enabled/disabled by Served flag.
      served: true
      # One and only one version must be marked as the storage version.
      storage: true
      schema:
        openAPIV3Schema:
          type: object
          properties:
            spec:
              type: object
              properties:
                cronSpec:
                  type: string
                image:
                  type: string
                replicas:
                  type: integer
  # either Namespaced or Cluster
  scope: Namespaced
  names:
    # plural name to be used in the URL: /apis/<group>/<version>/<plural>
    plural: crontabs
    # singular name to be used as an alias on the CLI and for display
    singular: crontab
    # kind is normally the CamelCased singular type. Your resource manifests use this.
    kind: CronTab
    # shortNames allow shorter string to match your resource on the CLI
    shortNames:
    - ct

and create it:

kubectl apply -f resourcedefinition.yaml

Then a new namespaced RESTful API endpoint is created at:

/apis/stable.example.com/v1/namespaces/*/crontabs/...

This endpoint URL can then be used to create and manage custom objects. The kind of these objects will be CronTab from the spec of the CustomResourceDefinition object you created above.

It might take a few seconds for the endpoint to be created. You can watch the Established condition of your CustomResourceDefinition to be true or watch the discovery information of the API server for your resource to show up.

Create custom objects

After the CustomResourceDefinition object has been created, you can create custom objects. Custom objects can contain custom fields. These fields can contain arbitrary JSON. In the following example, the cronSpec and image custom fields are set in a custom object of kind CronTab. The kind CronTab comes from the spec of the CustomResourceDefinition object you created above.

If you save the following YAML to my-crontab.yaml:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "* * * * */5"
  image: my-awesome-cron-image

and create it:

kubectl apply -f my-crontab.yaml

You can then manage your CronTab objects using kubectl. For example:

kubectl get crontab

Should print a list like this:

NAME                 AGE
my-new-cron-object   6s

Resource names are not case-sensitive when using kubectl, and you can use either the singular or plural forms defined in the CRD, as well as any short names.

You can also view the raw YAML data:

kubectl get ct -o yaml

You should see that it contains the custom cronSpec and image fields from the YAML you used to create it:

apiVersion: v1
items:
- apiVersion: stable.example.com/v1
  kind: CronTab
  metadata:
    annotations:
      kubectl.kubernetes.io/last-applied-configuration: |
                {"apiVersion":"stable.example.com/v1","kind":"CronTab","metadata":{"annotations":{},"name":"my-new-cron-object","namespace":"default"},"spec":{"cronSpec":"* * * * */5","image":"my-awesome-cron-image"}}
    creationTimestamp: "2021-06-20T07:35:27Z"
    generation: 1
    name: my-new-cron-object
    namespace: default
    resourceVersion: "1326"
    uid: 9aab1d66-628e-41bb-a422-57b8b3b1f5a9
  spec:
    cronSpec: '* * * * */5'
    image: my-awesome-cron-image
kind: List
metadata:
  resourceVersion: ""
  selfLink: ""

Delete a CustomResourceDefinition

When you delete a CustomResourceDefinition, the server will uninstall the RESTful API endpoint and delete all custom objects stored in it.

kubectl delete -f resourcedefinition.yaml
kubectl get crontabs

Error from server (NotFound): Unable to list {"stable.example.com" "v1" "crontabs"}: the server could not find the requested resource (get crontabs.stable.example.com)

If you later recreate the same CustomResourceDefinition, it will start out empty.

Specifying a structural schema

CustomResources store structured data in custom fields (alongside the built-in fields apiVersion, kind and metadata, which the API server validates implicitly). With OpenAPI v3.0 validation a schema can be specified, which is validated during creation and updates, compare below for details and limits of such a schema.

With apiextensions.k8s.io/v1 the definition of a structural schema is mandatory for CustomResourceDefinitions. In the beta version of CustomResourceDefinition, the structural schema was optional.

A structural schema is an OpenAPI v3.0 validation schema which:

specifies a non-empty type (via type in OpenAPI) for the root, for each specified field of an object node (via properties or additionalProperties in OpenAPI) and for each item in an array node (via items in OpenAPI), with the exception of:
- a node with x-kubernetes-int-or-string: true
- a node with x-kubernetes-preserve-unknown-fields: true
for each field in an object and each item in an array which is specified within any of allOf, anyOf, oneOf or not, the schema also specifies the field/item outside of those logical junctors (compare example 1 and 2).
does not set description, type, default, additionalProperties, nullable within an allOf, anyOf, oneOf or not, with the exception of the two pattern for x-kubernetes-int-or-string: true (see below).
if metadata is specified, then only restrictions on metadata.name and metadata.generateName are allowed.

Non-structural example 1:

allOf:
- properties:
    foo:
      ...

conflicts with rule 2. The following would be correct:

properties:
  foo:
    ...
allOf:
- properties:
    foo:
      ...

Non-structural example 2:

allOf:
- items:
    properties:
      foo:
        ...

conflicts with rule 2. The following would be correct:

items:
  properties:
    foo:
      ...
allOf:
- items:
    properties:
      foo:
        ...

Non-structural example 3:

properties:
  foo:
    pattern: "abc"
  metadata:
    type: object
    properties:
      name:
        type: string
        pattern: "^a"
      finalizers:
        type: array
        items:
          type: string
          pattern: "my-finalizer"
anyOf:
- properties:
    bar:
      type: integer
      minimum: 42
  required: ["bar"]
  description: "foo bar object"

is not a structural schema because of the following violations:

the type at the root is missing (rule 1).
the type of foo is missing (rule 1).
bar inside of anyOf is not specified outside (rule 2).
bar's type is within anyOf (rule 3).
the description is set within anyOf (rule 3).
metadata.finalizers might not be restricted (rule 4).

In contrast, the following, corresponding schema is structural:

type: object
description: "foo bar object"
properties:
  foo:
    type: string
    pattern: "abc"
  bar:
    type: integer
  metadata:
    type: object
    properties:
      name:
        type: string
        pattern: "^a"
anyOf:
- properties:
    bar:
      minimum: 42
  required: ["bar"]

Violations of the structural schema rules are reported in the NonStructural condition in the CustomResourceDefinition.

Field pruning

CustomResourceDefinitions store validated resource data in the cluster's persistence store, etcd. As with native Kubernetes resources such as ConfigMap, if you specify a field that the API server does not recognize, the unknown field is pruned (removed) before being persisted.

Note:

CRDs converted from apiextensions.k8s.io/v1beta1 to apiextensions.k8s.io/v1 might lack structural schemas, and spec.preserveUnknownFields might be true.

For legacy CustomResourceDefinition objects created as apiextensions.k8s.io/v1beta1 with spec.preserveUnknownFields set to true, the following is also true:

Pruning is not enabled.
You can store arbitrary data.

For compatibility with apiextensions.k8s.io/v1, update your custom resource definitions to:

Use a structural OpenAPI schema.
Set spec.preserveUnknownFields to false.

If you save the following YAML to my-crontab.yaml:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "* * * * */5"
  image: my-awesome-cron-image
  someRandomField: 42

and create it:

kubectl create --validate=false -f my-crontab.yaml -o yaml

your output is similar to:

apiVersion: stable.example.com/v1
kind: CronTab
metadata:
  creationTimestamp: 2017-05-31T12:56:35Z
  generation: 1
  name: my-new-cron-object
  namespace: default
  resourceVersion: "285"
  uid: 9423255b-4600-11e7-af6a-28d2447dc82b
spec:
  cronSpec: '* * * * */5'
  image: my-awesome-cron-image

Notice that the field someRandomField was pruned.

This example turned off client-side validation to demonstrate the API server's behavior, by adding the --validate=false command line option. Because the OpenAPI validation schemas are also published to clients, kubectl also checks for unknown fields and rejects those objects well before they would be sent to the API server.

Controlling pruning

By default, all unspecified fields for a custom resource, across all versions, are pruned. It is possible though to opt-out of that for specifc sub-trees of fields by adding x-kubernetes-preserve-unknown-fields: true in the structural OpenAPI v3 validation schema. For example:

type: object
properties:
  json:
    x-kubernetes-preserve-unknown-fields: true

The field json can store any JSON value, without anything being pruned.

You can also partially specify the permitted JSON; for example:

type: object
properties:
  json:
    x-kubernetes-preserve-unknown-fields: true
    type: object
    description: this is arbitrary JSON

With this, only object type values are allowed.

Pruning is enabled again for each specified property (or additionalProperties):

type: object
properties:
  json:
    x-kubernetes-preserve-unknown-fields: true
    type: object
    properties:
      spec:
        type: object
        properties:
          foo:
            type: string
          bar:
            type: string

With this, the value:

json:
  spec:
    foo: abc
    bar: def
    something: x
  status:
    something: x

is pruned to:

json:
  spec:
    foo: abc
    bar: def
  status:
    something: x

This means that the something field in the specified spec object is pruned, but everything outside is not.

IntOrString

Nodes in a schema with x-kubernetes-int-or-string: true are excluded from rule 1, such that the following is structural:

type: object
properties:
  foo:
    x-kubernetes-int-or-string: true

Also those nodes are partially excluded from rule 3 in the sense that the following two patterns are allowed (exactly those, without variations in order to additional fields):

x-kubernetes-int-or-string: true
anyOf:
- type: integer
- type: string
...

and

x-kubernetes-int-or-string: true
allOf:
- anyOf:
  - type: integer
  - type: string
- ... # zero or more
...

With one of those specification, both an integer and a string validate.

In Validation Schema Publishing, x-kubernetes-int-or-string: true is unfolded to one of the two patterns shown above.

RawExtension

RawExtensions (as in runtime.RawExtension defined in k8s.io/apimachinery) holds complete Kubernetes objects, i.e. with apiVersion and kind fields.

It is possible to specify those embedded objects (both completely without constraints or partially specified) by setting x-kubernetes-embedded-resource: true. For example:

type: object
properties:
  foo:
    x-kubernetes-embedded-resource: true
    x-kubernetes-preserve-unknown-fields: true

Here, the field foo holds a complete object, e.g.:

foo:
  apiVersion: v1
  kind: Pod
  spec:
    ...

Because x-kubernetes-preserve-unknown-fields: true is specified alongside, nothing is pruned. The use of x-kubernetes-preserve-unknown-fields: true is optional though.

With x-kubernetes-embedded-resource: true, the apiVersion, kind and metadata are implicitly specified and validated.

Serving multiple versions of a CRD

See Custom resource definition versioning for more information about serving multiple versions of your CustomResourceDefinition and migrating your objects from one version to another.

Advanced topics

Finalizers

Finalizers allow controllers to implement asynchronous pre-delete hooks. Custom objects support finalizers similar to built-in objects.

You can add a finalizer to a custom object like this:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  finalizers:
  - stable.example.com/finalizer

Identifiers of custom finalizers consist of a domain name, a forward slash and the name of the finalizer. Any controller can add a finalizer to any object's list of finalizers.

The first delete request on an object with finalizers sets a value for the metadata.deletionTimestamp field but does not delete it. Once this value is set, entries in the finalizers list can only be removed. While any finalizers remain it is also impossible to force the deletion of an object.

When the metadata.deletionTimestamp field is set, controllers watching the object execute any finalizers they handle and remove the finalizer from the list after they are done. It is the responsibility of each controller to remove its finalizer from the list.

The value of metadata.deletionGracePeriodSeconds controls the interval between polling updates.

Once the list of finalizers is empty, meaning all finalizers have been executed, the resource is deleted by Kubernetes.

Validation

Custom resources are validated via OpenAPI v3 schemas, by x-kubernetes-validations when the Validation Rules feature is enabled, and you can add additional validation using admission webhooks.

Additionally, the following restrictions are applied to the schema:

These fields cannot be set:
- definitions,
- dependencies,
- deprecated,
- discriminator,
- id,
- patternProperties,
- readOnly,
- writeOnly,
- xml,
- $ref.
The field uniqueItems cannot be set to true.
The field additionalProperties cannot be set to false.
The field additionalProperties is mutually exclusive with properties.

The x-kubernetes-validations extension can be used to validate custom resources using Common Expression Language (CEL) expressions when the Validation rules feature is enabled and the CustomResourceDefinition schema is a structural schema.

The default field can be set when the Defaulting feature is enabled, which is the case with apiextensions.k8s.io/v1 CustomResourceDefinitions. Defaulting is in GA since 1.17 (beta since 1.16 with the CustomResourceDefaulting feature gate enabled, which is the case automatically for many clusters for beta features).

Refer to the structural schemas section for other restrictions and CustomResourceDefinition features.

The schema is defined in the CustomResourceDefinition. In the following example, the CustomResourceDefinition applies the following validations on the custom object:

spec.cronSpec must be a string and must be of the form described by the regular expression.
spec.replicas must be an integer and must have a minimum value of 1 and a maximum value of 10.

Save the CustomResourceDefinition to resourcedefinition.yaml:

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  name: crontabs.stable.example.com
spec:
  group: stable.example.com
  versions:
    - name: v1
      served: true
      storage: true
      schema:
        # openAPIV3Schema is the schema for validating custom objects.
        openAPIV3Schema:
          type: object
          properties:
            spec:
              type: object
              properties:
                cronSpec:
                  type: string
                  pattern: '^(\d+|\*)(/\d+)?(\s+(\d+|\*)(/\d+)?){4}$'
                image:
                  type: string
                replicas:
                  type: integer
                  minimum: 1
                  maximum: 10
  scope: Namespaced
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
    shortNames:
    - ct

and create it:

kubectl apply -f resourcedefinition.yaml

A request to create a custom object of kind CronTab is rejected if there are invalid values in its fields. In the following example, the custom object contains fields with invalid values:

spec.cronSpec does not match the regular expression.
spec.replicas is greater than 10.

If you save the following YAML to my-crontab.yaml:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "* * * *"
  image: my-awesome-cron-image
  replicas: 15

and attempt to create it:

kubectl apply -f my-crontab.yaml

then you get an error:

The CronTab "my-new-cron-object" is invalid: []: Invalid value: map[string]interface {}{"apiVersion":"stable.example.com/v1", "kind":"CronTab", "metadata":map[string]interface {}{"name":"my-new-cron-object", "namespace":"default", "deletionTimestamp":interface {}(nil), "deletionGracePeriodSeconds":(*int64)(nil), "creationTimestamp":"2017-09-05T05:20:07Z", "uid":"e14d79e7-91f9-11e7-a598-f0761cb232d1", "clusterName":""}, "spec":map[string]interface {}{"cronSpec":"* * * *", "image":"my-awesome-cron-image", "replicas":15}}:
validation failure list:
spec.cronSpec in body should match '^(\d+|\*)(/\d+)?(\s+(\d+|\*)(/\d+)?){4}$'
spec.replicas in body should be less than or equal to 10

If the fields contain valid values, the object creation request is accepted.

Save the following YAML to my-crontab.yaml:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "* * * * */5"
  image: my-awesome-cron-image
  replicas: 5

And create it:

kubectl apply -f my-crontab.yaml
crontab "my-new-cron-object" created

Validation rules

FEATURE STATE: Kubernetes v1.23 [alpha]

Validation rules are in alpha since 1.23 and validate custom resources when the CustomResourceValidationExpressions feature gate is enabled. This feature is only available if the schema is a structural schema.

Validation rules use the Common Expression Language (CEL) to validate custom resource values. Validation rules are included in CustomResourceDefinition schemas using the x-kubernetes-validations extension.

The Rule is scoped to the location of the x-kubernetes-validations extension in the schema. And self variable in the CEL expression is bound to the scoped value.

For example:

    ...
    openAPIV3Schema:
      type: object
      properties:
        spec:
          type: object
          x-kubernetes-validation-rules:
            - rule: "self.minReplicas <= self.replicas"
              message: "replicas should be greater than or equal to minReplicas."
            - rule: "self.replicas <= self.maxReplicas"
              message: "replicas should be smaller than or equal to maxReplicas."
          properties:
            ...
            minReplicas:
              type: integer
            replicas:
              type: integer
            maxReplicas:
              type: integer
          required:
            - minReplicas
            - replicas
            - maxReplicas

will reject a request to create this custom resource:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  minReplicas: 0
  replicas: 20
  maxReplicas: 10

with the response:

The CronTab "my-new-cron-object" is invalid:
* spec: Invalid value: map[string]interface {}{"maxReplicas":10, "minReplicas":0, "replicas":20}: replicas should be smaller than or equal to maxReplicas.

x-kubernetes-validations could have multiple rules.

The rule under x-kubernetes-validations represents the expression which will be evaluated by CEL.

The message represents the message displayed when validation fails. If message is unset, the above response would be:

The CronTab "my-new-cron-object" is invalid:
* spec: Invalid value: map[string]interface {}{"maxReplicas":10, "minReplicas":0, "replicas":20}: failed rule: self.replicas <= self.maxReplicas

Validation rules are compiled when CRDs are created/updated. The request of CRDs create/update will fail if compilation of validation rules fail. Compilation process includes type checking as well.

The compilation failure:

no_matching_overload: this function has no overload for the types of the arguments.

e.g. Rule like self == true against a field of integer type will get error:

Invalid value: apiextensions.ValidationRule{Rule:"self == true", Message:""}: compilation failed: ERROR: \<input>:1:6: found no matching overload for '_==_' applied to '(int, bool)'

no_such_field: does not contain the desired field.

e.g. Rule like self.nonExistingField > 0 against a non-existing field will return the error:

Invalid value: apiextensions.ValidationRule{Rule:"self.nonExistingField > 0", Message:""}: compilation failed: ERROR: \<input>:1:5: undefined field 'nonExistingField'

invalid argument: invalid argument to macros.

e.g. Rule like has(self) will return error:

Invalid value: apiextensions.ValidationRule{Rule:"has(self)", Message:""}: compilation failed: ERROR: <input>:1:4: invalid argument to has() macro

Validation Rules Examples:

Rule	Purpose
`self.minReplicas <= self.replicas && self.replicas <= self.maxReplicas`	Validate that the three fields defining replicas are ordered appropriately
`'Available' in self.stateCounts`	Validate that an entry with the 'Available' key exists in a map
`(size(self.list1) == 0) != (size(self.list2) == 0)`	Validate that one of two lists is non-empty, but not both
`!('MY_KEY' in self.map1) \|\| self['MY_KEY'].matches('^[a-zA-Z]*$')`	Validate the value of a map for a specific key, if it is in the map
`self.envars.filter(e, e.name = 'MY_ENV').all(e, e.value.matches('^[a-zA-Z]*$')`	Validate the 'value' field of a listMap entry where key field 'name' is 'MY_ENV'
`has(self.expired) && self.created + self.ttl < self.expired`	Validate that 'expired' date is after a 'create' date plus a 'ttl' duration
`self.health.startsWith('ok')`	Validate a 'health' string field has the prefix 'ok'
`self.widgets.exists(w, w.key == 'x' && w.foo < 10)`	Validate that the 'foo' property of a listMap item with a key 'x' is less than 10
`type(self) == string ? self == '100%' : self == 1000`	Validate an int-or-string field for both the the int and string cases
`self.metadata.name.startsWith(self.prefix)`	Validate that an object's name has the prefix of another field value
`self.set1.all(e, !(e in self.set2))`	Validate that two listSets are disjoint
`size(self.names) == size(self.details) && self.names.all(n, n in self.details)`	Validate the 'details' map is keyed by the items in the 'names' listSet

Xref: Supported evaluation on CEL

If the Rule is scoped to the root of a resource, it may make field selection into any fields declared in the OpenAPIv3 schema of the CRD as well as apiVersion, kind, metadata.name and metadata.generateName. This includes selection of fields in both the spec and status in the same expression:

    ...
    openAPIV3Schema:
      type: object
      x-kubernetes-validation-rules:
        - rule: "self.status.availableReplicas >= self.spec.minReplicas"
      properties:
          spec:
            type: object
            properties:
              minReplicas:
                type: integer
              ...
          status:
            type: object
            properties:
              availableReplicas:
                type: integer

If the Rule is scoped to an object with properties, the accessible properties of the object are field selectable via self.field and field presence can be checked via has(self.field). Null valued fields are treated as absent fields in CEL expressions.

    ...
    openAPIV3Schema:
      type: object
      properties:
        spec:
          type: object
          x-kubernetes-validation-rules:
            - rule: "has(self.foo)"
          properties:
            ...
            foo:
              type: integer

If the Rule is scoped to an object with additionalProperties (i.e. a map) the value of the map are accessible via self[mapKey], map containment can be checked via mapKey in self and all entries of the map are accessible via CEL macros and functions such as self.all(...).

    ...
    openAPIV3Schema:
      type: object
      properties:
        spec:
          type: object
          x-kubernetes-validation-rules:
            - rule: "self['xyz'].foo > 0"
          additionalProperties:
            ...
            type: object
            properties:
              foo:
                type: integer

If the Rule is scoped to an array, the elements of the array are accessible via self[i] and also by macros and functions.

    ...
    openAPIV3Schema:
      type: object
      properties:
        ...
        foo:
          type: array
          x-kubernetes-validation-rules:
            - rule: "size(self) == 1"
          items:
            type: string

If the Rule is scoped to a scalar, self is bound to the scalar value.

    ...
    openAPIV3Schema:
      type: object
      properties:
        spec:
          type: object
          properties:
            ...
            foo:
              type: integer
              x-kubernetes-validation-rules:
              - rule: "self > 0"

Examples:

type of the field rule scoped to	Rule example
root object	`self.status.actual <= self.spec.maxDesired`
map of objects	`self.components['Widget'].priority < 10`
list of integers	`self.values.all(value, value >= 0 && value < 100)`
string	`self.startsWith('kube')`

The apiVersion, kind, metadata.name and metadata.generateName are always accessible from the root of the object and from any x-kubernetes-embedded-resource annotated objects. No other metadata properties are accessible.

Unknown data preserved in custom resources via x-kubernetes-preserve-unknown-fields is not accessible in CEL expressions. This includes:

Unknown field values that are preserved by object schemas with x-kubernetes-preserve-unknown-fields.
Object properties where the property schema is of an "unknown type". An "unknown type" is recursively defined as:
- A schema with no type and x-kubernetes-preserve-unknown-fields set to true
- An array where the items schema is of an "unknown type"
- An object where the additionalProperties schema is of an "unknown type"

Only property names of the form [a-zA-Z_.-/][a-zA-Z0-9_.-/]* are accessible. Accessible property names are escaped according to the following rules when accessed in the expression:

escape sequence	property name equivalent
`__underscores__`	`__`
`__dot__`	`.`
`__dash__`	`-`
`__slash__`	`/`
`__{keyword}__`	CEL RESERVED keyword

Note: CEL RESERVED keyword needs to match the exact property name to be escaped (e.g. int in the word sprint would not be escaped).

Examples on escaping:

property name	rule with escaped property name
namespace	`self.__namespace__ > 0`
x-prop	`self.x__dash__prop > 0`
redact__d	`self.redact__underscores__d > 0`
string	`self.startsWith('kube')`

Equality on arrays with x-kubernetes-list-type of set or map ignores element order, i.e. [1, 2] == [2, 1]. Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type:

set: X + Y performs a union where the array positions of all elements in X are preserved and non-intersecting elements in Y are appended, retaining their partial order.
map: X + Y performs a merge where the array positions of all keys in X are preserved but the values are overwritten by values in Y when the key sets of X and Y intersect. Elements in Y with non-intersecting keys are appended, retaining their partial order.

Here is the declarations type mapping between OpenAPIv3 and CEL type:

OpenAPIv3 type	CEL type
'object' with Properties	object / "message type"
'object' with AdditionalProperties	map
'object' with x-kubernetes-embedded-type	object / "message type", 'apiVersion', 'kind', 'metadata.name' and 'metadata.generateName' are implicitly included in schema
'object' with x-kubernetes-preserve-unknown-fields	object / "message type", unknown fields are NOT accessible in CEL expression
x-kubernetes-int-or-string	dynamic object that is either an int or a string, `type(value)` can be used to check the type
'array	list
'array' with x-kubernetes-list-type=map	list with map based Equality & unique key guarantees
'array' with x-kubernetes-list-type=set	list with set based Equality & unique entry guarantees
'boolean'	boolean
'number' (all formats)	double
'integer' (all formats)	int (64)
'null'	null_type
'string'	string
'string' with format=byte (base64 encoded)	bytes
'string' with format=date	timestamp (google.protobuf.Timestamp)
'string' with format=datetime	timestamp (google.protobuf.Timestamp)
'string' with format=duration	duration (google.protobuf.Duration)

xref: CEL types, OpenAPI types, Kubernetes Structural Schemas.

Defaulting

Note: To use defaulting, your CustomResourceDefinition must use API version apiextensions.k8s.io/v1.

Defaulting allows to specify default values in the OpenAPI v3 validation schema:

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  name: crontabs.stable.example.com
spec:
  group: stable.example.com
  versions:
    - name: v1
      served: true
      storage: true
      schema:
        # openAPIV3Schema is the schema for validating custom objects.
        openAPIV3Schema:
          type: object
          properties:
            spec:
              type: object
              properties:
                cronSpec:
                  type: string
                  pattern: '^(\d+|\*)(/\d+)?(\s+(\d+|\*)(/\d+)?){4}$'
                  default: "5 0 * * *"
                image:
                  type: string
                replicas:
                  type: integer
                  minimum: 1
                  maximum: 10
                  default: 1
  scope: Namespaced
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
    shortNames:
    - ct

With this both cronSpec and replicas are defaulted:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  image: my-awesome-cron-image

leads to

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "5 0 * * *"
  image: my-awesome-cron-image
  replicas: 1

Defaulting happens on the object

in the request to the API server using the request version defaults,
when reading from etcd using the storage version defaults,
after mutating admission plugins with non-empty patches using the admission webhook object version defaults.

Defaults applied when reading data from etcd are not automatically written back to etcd. An update request via the API is required to persist those defaults back into etcd.

Default values must be pruned (with the exception of defaults for metadata fields) and must validate against a provided schema.

Default values for metadata fields of x-kubernetes-embedded-resources: true nodes (or parts of a default value covering metadata) are not pruned during CustomResourceDefinition creation, but through the pruning step during handling of requests.

Defaulting and Nullable

New in 1.20: null values for fields that either don't specify the nullable flag, or give it a false value, will be pruned before defaulting happens. If a default is present, it will be applied. When nullable is true, null values will be conserved and won't be defaulted.

For example, given the OpenAPI schema below:

type: object
properties:
  spec:
    type: object
    properties:
      foo:
        type: string
        nullable: false
        default: "default"
      bar:
        type: string
        nullable: true
      baz:
        type: string

creating an object with null values for foo and bar and baz

spec:
  foo: null
  bar: null
  baz: null

leads to

spec:
  foo: "default"
  bar: null

with foo pruned and defaulted because the field is non-nullable, bar maintaining the null value due to nullable: true, and baz pruned because the field is non-nullable and has no default.

Publish Validation Schema in OpenAPI v2

CustomResourceDefinition OpenAPI v3 validation schemas which are structural and enable pruning are published as part of the OpenAPI v2 spec from Kubernetes API server.

The kubectl command-line tool consumes the published schema to perform client-side validation (kubectl create and kubectl apply), schema explanation (kubectl explain) on custom resources. The published schema can be consumed for other purposes as well, like client generation or documentation.

The OpenAPI v3 validation schema is converted to OpenAPI v2 schema, and show up in definitions and paths fields in the OpenAPI v2 spec.

The following modifications are applied during the conversion to keep backwards compatibility with kubectl in previous 1.13 version. These modifications prevent kubectl from being over-strict and rejecting valid OpenAPI schemas that it doesn't understand. The conversion won't modify the validation schema defined in CRD, and therefore won't affect validation in the API server.

The following fields are removed as they aren't supported by OpenAPI v2 (in future versions OpenAPI v3 will be used without these restrictions)
- The fields allOf, anyOf, oneOf and not are removed
If nullable: true is set, we drop type, nullable, items and properties because OpenAPI v2 is not able to express nullable. To avoid kubectl to reject good objects, this is necessary.

Additional printer columns

The kubectl tool relies on server-side output formatting. Your cluster's API server decides which columns are shown by the kubectl get command. You can customize these columns for a CustomResourceDefinition. The following example adds the Spec, Replicas, and Age columns.

Save the CustomResourceDefinition to resourcedefinition.yaml:

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  name: crontabs.stable.example.com
spec:
  group: stable.example.com
  scope: Namespaced
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
    shortNames:
    - ct
  versions:
  - name: v1
    served: true
    storage: true
    schema:
      openAPIV3Schema:
        type: object
        properties:
          spec:
            type: object
            properties:
              cronSpec:
                type: string
              image:
                type: string
              replicas:
                type: integer
    additionalPrinterColumns:
    - name: Spec
      type: string
      description: The cron spec defining the interval a CronJob is run
      jsonPath: .spec.cronSpec
    - name: Replicas
      type: integer
      description: The number of jobs launched by the CronJob
      jsonPath: .spec.replicas
    - name: Age
      type: date
      jsonPath: .metadata.creationTimestamp

Create the CustomResourceDefinition:

kubectl apply -f resourcedefinition.yaml

Create an instance using the my-crontab.yaml from the previous section.

Invoke the server-side printing:

kubectl get crontab my-new-cron-object

Notice the NAME, SPEC, REPLICAS, and AGE columns in the output:

NAME                 SPEC        REPLICAS   AGE
my-new-cron-object   * * * * *   1          7s

Note: The NAME column is implicit and does not need to be defined in the CustomResourceDefinition.

Priority

Each column includes a priority field. Currently, the priority differentiates between columns shown in standard view or wide view (using the -o wide flag).

Columns with priority 0 are shown in standard view.
Columns with priority greater than 0 are shown only in wide view.

Type

A column's type field can be any of the following (compare OpenAPI v3 data types):

integer – non-floating-point numbers
number – floating point numbers
string – strings
boolean – true or false
date – rendered differentially as time since this timestamp.

If the value inside a CustomResource does not match the type specified for the column, the value is omitted. Use CustomResource validation to ensure that the value types are correct.

Format

A column's format field can be any of the following:

int32
int64
float
double
byte
date
date-time
password

The column's format controls the style used when kubectl prints the value.

Subresources

Custom resources support /status and /scale subresources.

The status and scale subresources can be optionally enabled by defining them in the CustomResourceDefinition.

Status subresource

When the status subresource is enabled, the /status subresource for the custom resource is exposed.

The status and the spec stanzas are represented by the .status and .spec JSONPaths respectively inside of a custom resource.
PUT requests to the /status subresource take a custom resource object and ignore changes to anything except the status stanza.
PUT requests to the /status subresource only validate the status stanza of the custom resource.
PUT/POST/PATCH requests to the custom resource ignore changes to the status stanza.
The .metadata.generation value is incremented for all changes, except for changes to .metadata or .status.
Only the following constructs are allowed at the root of the CRD OpenAPI validation schema:
- description
- example
- exclusiveMaximum
- exclusiveMinimum
- externalDocs
- format
- items
- maximum
- maxItems
- maxLength
- minimum
- minItems
- minLength
- multipleOf
- pattern
- properties
- required
- title
- type
- uniqueItems

Scale subresource

When the scale subresource is enabled, the /scale subresource for the custom resource is exposed. The autoscaling/v1.Scale object is sent as the payload for /scale.

To enable the scale subresource, the following fields are defined in the CustomResourceDefinition.

specReplicasPath defines the JSONPath inside of a custom resource that corresponds to scale.spec.replicas.
- It is a required value.
- Only JSONPaths under .spec and with the dot notation are allowed.
- If there is no value under the specReplicasPath in the custom resource, the /scale subresource will return an error on GET.
statusReplicasPath defines the JSONPath inside of a custom resource that corresponds to scale.status.replicas.
- It is a required value.
- Only JSONPaths under .status and with the dot notation are allowed.
- If there is no value under the statusReplicasPath in the custom resource, the status replica value in the /scale subresource will default to 0.
labelSelectorPath defines the JSONPath inside of a custom resource that corresponds to Scale.Status.Selector.
- It is an optional value.
- It must be set to work with HPA.
- Only JSONPaths under .status or .spec and with the dot notation are allowed.
- If there is no value under the labelSelectorPath in the custom resource, the status selector value in the /scale subresource will default to the empty string.
- The field pointed by this JSON path must be a string field (not a complex selector struct) which contains a serialized label selector in string form.

In the following example, both status and scale subresources are enabled.

Save the CustomResourceDefinition to resourcedefinition.yaml:

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  name: crontabs.stable.example.com
spec:
  group: stable.example.com
  versions:
    - name: v1
      served: true
      storage: true
      schema:
        openAPIV3Schema:
          type: object
          properties:
            spec:
              type: object
              properties:
                cronSpec:
                  type: string
                image:
                  type: string
                replicas:
                  type: integer
            status:
              type: object
              properties:
                replicas:
                  type: integer
                labelSelector:
                  type: string
      # subresources describes the subresources for custom resources.
      subresources:
        # status enables the status subresource.
        status: {}
        # scale enables the scale subresource.
        scale:
          # specReplicasPath defines the JSONPath inside of a custom resource that corresponds to Scale.Spec.Replicas.
          specReplicasPath: .spec.replicas
          # statusReplicasPath defines the JSONPath inside of a custom resource that corresponds to Scale.Status.Replicas.
          statusReplicasPath: .status.replicas
          # labelSelectorPath defines the JSONPath inside of a custom resource that corresponds to Scale.Status.Selector.
          labelSelectorPath: .status.labelSelector
  scope: Namespaced
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
    shortNames:
    - ct

And create it:

kubectl apply -f resourcedefinition.yaml

After the CustomResourceDefinition object has been created, you can create custom objects.

If you save the following YAML to my-crontab.yaml:

apiVersion: "stable.example.com/v1"
kind: CronTab
metadata:
  name: my-new-cron-object
spec:
  cronSpec: "* * * * */5"
  image: my-awesome-cron-image
  replicas: 3

and create it:

kubectl apply -f my-crontab.yaml

Then new namespaced RESTful API endpoints are created at:

/apis/stable.example.com/v1/namespaces/*/crontabs/status

and

/apis/stable.example.com/v1/namespaces/*/crontabs/scale

A custom resource can be scaled using the kubectl scale command. For example, the following command sets .spec.replicas of the custom resource created above to 5:

kubectl scale --replicas=5 crontabs/my-new-cron-object
crontabs "my-new-cron-object" scaled

kubectl get crontabs my-new-cron-object -o jsonpath='{.spec.replicas}'
5

You can use a PodDisruptionBudget to protect custom resources that have the scale subresource enabled.

What's next

Read about custom resources.
See CustomResourceDefinition.
Serve multiple versions of a CustomResourceDefinition.

2.2 - Versions in CustomResourceDefinitions

This page explains how to add versioning information to CustomResourceDefinitions, to indicate the stability level of your CustomResourceDefinitions or advance your API to a new version with conversion between API representations. It also describes how to upgrade an object from one version to another.

Before you begin

You should have a initial understanding of custom resources.

Your Kubernetes server must be at or later than version v1.16. To check the version, enter kubectl version.

Overview

The CustomResourceDefinition API provides a workflow for introducing and upgrading to new versions of a CustomResourceDefinition.

When a CustomResourceDefinition is created, the first version is set in the CustomResourceDefinition spec.versions list to an appropriate stability level and a version number. For example v1beta1 would indicate that the first version is not yet stable. All custom resource objects will initially be stored at this version.

Once the CustomResourceDefinition is created, clients may begin using the v1beta1 API.

Later it might be necessary to add new version such as v1.

Adding a new version:

Pick a conversion strategy. Since custom resource objects need to be able to be served at both versions, that means they will sometimes be served at a different version than their storage version. In order for this to be possible, the custom resource objects must sometimes be converted between the version they are stored at and the version they are served at. If the conversion involves schema changes and requires custom logic, a conversion webhook should be used. If there are no schema changes, the default None conversion strategy may be used and only the apiVersion field will be modified when serving different versions.
If using conversion webhooks, create and deploy the conversion webhook. See the Webhook conversion for more details.
Update the CustomResourceDefinition to include the new version in the spec.versions list with served:true. Also, set spec.conversion field to the selected conversion strategy. If using a conversion webhook, configure spec.conversion.webhookClientConfig field to call the webhook.

Once the new version is added, clients may incrementally migrate to the new version. It is perfectly safe for some clients to use the old version while others use the new version.

Migrate stored objects to the new version:

See the upgrade existing objects to a new stored version section.

It is safe for clients to use both the old and new version before, during and after upgrading the objects to a new stored version.

Removing an old version:

Ensure all clients are fully migrated to the new version. The kube-apiserver logs can be reviewed to help identify any clients that are still accessing via the old version.
Set served to false for the old version in the spec.versions list. If any clients are still unexpectedly using the old version they may begin reporting errors attempting to access the custom resource objects at the old version. If this occurs, switch back to using served:true on the old version, migrate the remaining clients to the new version and repeat this step.
Ensure the upgrade of existing objects to the new stored version step has been completed.
1. Verify that the storage is set to true for the new version in the spec.versions list in the CustomResourceDefinition.
2. Verify that the old version is no longer listed in the CustomResourceDefinition status.storedVersions.
Remove the old version from the CustomResourceDefinition spec.versions list.
Drop conversion support for the old version in conversion webhooks.

Specify multiple versions

The CustomResourceDefinition API versions field can be used to support multiple versions of custom resources that you have developed. Versions can have different schemas, and conversion webhooks can convert custom resources between versions. Webhook conversions should follow the Kubernetes API conventions wherever applicable. Specifically, See the API change documentation for a set of useful gotchas and suggestions.

Note: In apiextensions.k8s.io/v1beta1, there was a version field instead of versions. The version field is deprecated and optional, but if it is not empty, it must match the first item in the versions field.

This example shows a CustomResourceDefinition with two versions. For the first example, the assumption is all versions share the same schema with no conversion between them. The comments in the YAML provide more context.

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  # name must match the spec fields below, and be in the form: <plural>.<group>
  name: crontabs.example.com
spec:
  # group name to use for REST API: /apis/<group>/<version>
  group: example.com
  # list of versions supported by this CustomResourceDefinition
  versions:
  - name: v1beta1
    # Each version can be enabled/disabled by Served flag.
    served: true
    # One and only one version must be marked as the storage version.
    storage: true
    # A schema is required
    schema:
      openAPIV3Schema:
        type: object
        properties:
          host:
            type: string
          port:
            type: string
  - name: v1
    served: true
    storage: false
    schema:
      openAPIV3Schema:
        type: object
        properties:
          host:
            type: string
          port:
            type: string
  # The conversion section is introduced in Kubernetes 1.13+ with a default value of
  # None conversion (strategy sub-field set to None).
  conversion:
    # None conversion assumes the same schema for all versions and only sets the apiVersion
    # field of custom resources to the proper value
    strategy: None
  # either Namespaced or Cluster
  scope: Namespaced
  names:
    # plural name to be used in the URL: /apis/<group>/<version>/<plural>
    plural: crontabs
    # singular name to be used as an alias on the CLI and for display
    singular: crontab
    # kind is normally the CamelCased singular type. Your resource manifests use this.
    kind: CronTab
    # shortNames allow shorter string to match your resource on the CLI
    shortNames:
    - ct

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  # name must match the spec fields below, and be in the form: <plural>.<group>
  name: crontabs.example.com
spec:
  # group name to use for REST API: /apis/<group>/<version>
  group: example.com
  # list of versions supported by this CustomResourceDefinition
  versions:
  - name: v1beta1
    # Each version can be enabled/disabled by Served flag.
    served: true
    # One and only one version must be marked as the storage version.
    storage: true
  - name: v1
    served: true
    storage: false
  validation:
    openAPIV3Schema:
      type: object
      properties:
        host:
          type: string
        port:
          type: string
  # The conversion section is introduced in Kubernetes 1.13+ with a default value of
  # None conversion (strategy sub-field set to None).
  conversion:
    # None conversion assumes the same schema for all versions and only sets the apiVersion
    # field of custom resources to the proper value
    strategy: None
  # either Namespaced or Cluster
  scope: Namespaced
  names:
    # plural name to be used in the URL: /apis/<group>/<version>/<plural>
    plural: crontabs
    # singular name to be used as an alias on the CLI and for display
    singular: crontab
    # kind is normally the PascalCased singular type. Your resource manifests use this.
    kind: CronTab
    # shortNames allow shorter string to match your resource on the CLI
    shortNames:
    - ct

You can save the CustomResourceDefinition in a YAML file, then use kubectl apply to create it.

kubectl apply -f my-versioned-crontab.yaml

After creation, the API server starts to serve each enabled version at an HTTP REST endpoint. In the above example, the API versions are available at /apis/example.com/v1beta1 and /apis/example.com/v1.

Version priority

Regardless of the order in which versions are defined in a CustomResourceDefinition, the version with the highest priority is used by kubectl as the default version to access objects. The priority is determined by parsing the name field to determine the version number, the stability (GA, Beta, or Alpha), and the sequence within that stability level.

The algorithm used for sorting the versions is designed to sort versions in the same way that the Kubernetes project sorts Kubernetes versions. Versions start with a v followed by a number, an optional beta or alpha designation, and optional additional numeric versioning information. Broadly, a version string might look like v2 or v2beta1. Versions are sorted using the following algorithm:

Entries that follow Kubernetes version patterns are sorted before those that do not.
For entries that follow Kubernetes version patterns, the numeric portions of the version string is sorted largest to smallest.
If the strings beta or alpha follow the first numeric portion, they sorted in that order, after the equivalent string without the beta or alpha suffix (which is presumed to be the GA version).
If another number follows the beta, or alpha, those numbers are also sorted from largest to smallest.
Strings that don't fit the above format are sorted alphabetically and the numeric portions are not treated specially. Notice that in the example below, foo1 is sorted above foo10. This is different from the sorting of the numeric portion of entries that do follow the Kubernetes version patterns.

This might make sense if you look at the following sorted version list:

- v10
- v2
- v1
- v11beta2
- v10beta3
- v3beta1
- v12alpha1
- v11alpha2
- foo1
- foo10

For the example in Specify multiple versions, the version sort order is v1, followed by v1beta1. This causes the kubectl command to use v1 as the default version unless the provided object specifies the version.

Version deprecation

FEATURE STATE: Kubernetes v1.19 [stable]

Starting in v1.19, a CustomResourceDefinition can indicate a particular version of the resource it defines is deprecated. When API requests to a deprecated version of that resource are made, a warning message is returned in the API response as a header. The warning message for each deprecated version of the resource can be customized if desired.

A customized warning message should indicate the deprecated API group, version, and kind, and should indicate what API group, version, and kind should be used instead, if applicable.

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
  name: crontabs.example.com
spec:
  group: example.com
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
  scope: Namespaced
  versions:
  - name: v1alpha1
    served: true
    # This indicates the v1alpha1 version of the custom resource is deprecated.
    # API requests to this version receive a warning header in the server response.
    deprecated: true
    # This overrides the default warning returned to API clients making v1alpha1 API requests.
    deprecationWarning: "example.com/v1alpha1 CronTab is deprecated; see http://example.com/v1alpha1-v1 for instructions to migrate to example.com/v1 CronTab"
    schema: ...
  - name: v1beta1
    served: true
    # This indicates the v1beta1 version of the custom resource is deprecated.
    # API requests to this version receive a warning header in the server response.
    # A default warning message is returned for this version.
    deprecated: true
    schema: ...
  - name: v1
    served: true
    storage: true
    schema: ...

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  name: crontabs.example.com
spec:
  group: example.com
  names:
    plural: crontabs
    singular: crontab
    kind: CronTab
  scope: Namespaced
  validation: ...
  versions:
  - name: v1alpha1
    served: true
    # This indicates the v1alpha1 version of the custom resource is deprecated.
    # API requests to this version receive a warning header in the server response.
    deprecated: true
    # This overrides the default warning returned to API clients making v1alpha1 API requests.
    deprecationWarning: "example.com/v1alpha1 CronTab is deprecated; see http://example.com/v1alpha1-v1 for instructions to migrate to example.com/v1 CronTab"
  - name: v1beta1
    served: true
    # This indicates the v1beta1 version of the custom resource is deprecated.
    # API requests to this version receive a warning header in the server response.
    # A default warning message is returned for this version.
    deprecated: true
  - name: v1
    served: true
    storage: true

Webhook conversion

FEATURE STATE: Kubernetes v1.16 [stable]

Note: Webhook conversion is available as beta since 1.15, and as alpha since Kubernetes 1.13. The CustomResourceWebhookConversion feature must be enabled, which is the case automatically for many clusters for beta features. Please refer to the feature gate documentation for more information.

The above example has a None conversion between versions which only sets the apiVersion field on conversion and does not change the rest of the object. The API server also supports webhook conversions that call an external service in case a conversion is required. For example when:

custom resource is requested in a different version than stored version.
Watch is created in one version but the changed object is stored in another version.
custom resource PUT request is in a different version than storage version.

To cover all of these cases and to optimize conversion by the API server, the conversion requests may contain multiple objects in order to minimize the external calls. The webhook should perform these conversions independently.

Write a conversion webhook server

Please refer to the implementation of the custom resource conversion webhook server that is validated in a Kubernetes e2e test. The webhook handles the ConversionReview requests sent by the API servers, and sends back conversion results wrapped in ConversionResponse. Note that the request contains a list of custom resources that need to be converted independently without changing the order of objects. The example server is organized in a way to be reused for other conversions. Most of the common code are located in the framework file that leaves only one function to be implemented for different conversions.

Note: The example conversion webhook server leaves the ClientAuth field empty, which defaults to NoClientCert. This means that the webhook server does not authenticate the identity of the clients, supposedly API servers. If you need mutual TLS or other ways to authenticate the clients, see how to authenticate API servers.

Permissible mutations

A conversion webhook must not mutate anything inside of metadata of the converted object other than labels and annotations. Attempted changes to name, UID and namespace are rejected and fail the request which caused the conversion. All other changes are ignored.

Deploy the conversion webhook service

Documentation for deploying the conversion webhook is the same as for the admission webhook example service. The assumption for next sections is that the conversion webhook server is deployed to a service named example-conversion-webhook-server in default namespace and serving traffic on path /crdconvert.

Note: When the webhook server is deployed into the Kubernetes cluster as a service, it has to be exposed via a service on port 443 (The server itself can have an arbitrary port but the service object should map it to port 443). The communication between the API server and the webhook service may fail if a different port is used for the service.

Configure CustomResourceDefinition to use conversion webhooks

The None conversion example can be extended to use the conversion webhook by modifying conversion section of the spec:

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  # name must match the spec fields below, and be in the form: <plural>.<group>
  name: crontabs.example.com
spec:
  # group name to use for REST API: /apis/<group>/<version>
  group: example.com
  # list of versions supported by this CustomResourceDefinition
  versions:
  - name: v1beta1
    # Each version can be enabled/disabled by Served flag.
    served: true
    # One and only one version must be marked as the storage version.
    storage: true
    # Each version can define it's own schema when there is no top-level
    # schema is defined.
    schema:
      openAPIV3Schema:
        type: object
        properties:
          hostPort:
            type: string
  - name: v1
    served: true
    storage: false
    schema:
      openAPIV3Schema:
        type: object
        properties:
          host:
            type: string
          port:
            type: string
  conversion:
    # a Webhook strategy instruct API server to call an external webhook for any conversion between custom resources.
    strategy: Webhook
    # webhook is required when strategy is `Webhook` and it configures the webhook endpoint to be called by API server.
    webhook:
      # conversionReviewVersions indicates what ConversionReview versions are understood/preferred by the webhook.
      # The first version in the list understood by the API server is sent to the webhook.
      # The webhook must respond with a ConversionReview object in the same version it received.
      conversionReviewVersions: ["v1","v1beta1"]
      clientConfig:
        service:
          namespace: default
          name: example-conversion-webhook-server
          path: /crdconvert
        caBundle: "Ci0tLS0tQk...<base64-encoded PEM bundle>...tLS0K"
  # either Namespaced or Cluster
  scope: Namespaced
  names:
    # plural name to be used in the URL: /apis/<group>/<version>/<plural>
    plural: crontabs
    # singular name to be used as an alias on the CLI and for display
    singular: crontab
    # kind is normally the CamelCased singular type. Your resource manifests use this.
    kind: CronTab
    # shortNames allow shorter string to match your resource on the CLI
    shortNames:
    - ct

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
  # name must match the spec fields below, and be in the form: <plural>.<group>
  name: crontabs.example.com
spec:
  # group name to use for REST API: /apis/<group>/<version>
  group: example.com
  # prunes object fields that are not specified in OpenAPI schemas below.
  preserveUnknownFields: false
  # list of versions supported by this CustomResourceDefinition
  versions:
  - name: v1beta1
    # Each version can be enabled/disabled by Served flag.
    served: true
    # One and only one version must be marked as the storage version.
    storage: true
    # Each version can define it's own schema when there is no top-level
    # schema is defined.
    schema:
      openAPIV3Schema:
        type: object
        properties:
          hostPort:
            type: string
  - name: v1
    served: true
    storage: false
    schema:
      openAPIV3Schema:
        type: object
        properties:
          host:
            type: string
          port:
            type: string
  conversion:
    # a Webhook strategy instruct API server to call an external webhook for any conversion between custom resources.
    strategy: Webhook
    # webhookClientConfig is required when strategy is `Webhook` and it configures the webhook endpoint to be called by API server.
    webhookClientConfig:
      service:
        namespace: default
        name: example-conversion-webhook-server
        path: /crdconvert
      caBundle: "Ci0tLS0tQk...<base64-encoded PEM bundle>...tLS0K"
  # either Namespaced or Cluster
  scope: Namespaced
  names:
    # plural name to be used in the URL: /apis/<group>/<version>/<plural>
    plural: crontabs
    # singular name to be used as an alias on the CLI and for display
    singular: crontab
    # kind is normally the CamelCased singular type. Your resource manifests use this.
    kind: CronTab
    # shortNames allow shorter string to match your resource on the CLI
    shortNames:
    - ct

You can save the CustomResourceDefinition in a YAML file, then use kubectl apply to apply it.

kubectl apply -f my-versioned-crontab-with-conversion.yaml

Make sure the conversion service is up and running before applying new changes.

Contacting the webhook

Once the API server has determined a request should be sent to a conversion webhook, it needs to know how to contact the webhook. This is specified in the webhookClientConfig stanza of the webhook configuration.

Conversion webhooks can either be called via a URL or a service reference, and can optionally include a custom CA bundle to use to verify the TLS connection.

URL

url gives the location of the webhook, in standard URL form (scheme://host:port/path).

The host should not refer to a service running in the cluster; use a service reference by specifying the service field instead. The host might be resolved via external DNS in some apiservers (i.e., kube-apiserver cannot resolve in-cluster DNS as that would be a layering violation). host may also be an IP address.

Please note that using localhost or 127.0.0.1 as a host is risky unless you take great care to run this webhook on all hosts which run an apiserver which might need to make calls to this webhook. Such installations are likely to be non-portable or not readily run in a new cluster.

The scheme must be "https"; the URL must begin with "https://".

Attempting to use a user or basic auth (for example "user:password@") is not allowed. Fragments ("#...") and query parameters ("?...") are also not allowed.

Here is an example of a conversion webhook configured to call a URL (and expects the TLS certificate to be verified using system trust roots, so does not specify a caBundle):

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    webhook:
      clientConfig:
        url: "https://my-webhook.example.com:9443/my-webhook-path"
...

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    webhookClientConfig:
      url: "https://my-webhook.example.com:9443/my-webhook-path"
...

Service Reference

The service stanza inside webhookClientConfig is a reference to the service for a conversion webhook. If the webhook is running within the cluster, then you should use service instead of url. The service namespace and name are required. The port is optional and defaults to 443. The path is optional and defaults to "/".

Here is an example of a webhook that is configured to call a service on port "1234" at the subpath "/my-path", and to verify the TLS connection against the ServerName my-service-name.my-service-namespace.svc using a custom CA bundle.

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    webhook:
      clientConfig:
        service:
          namespace: my-service-namespace
          name: my-service-name
          path: /my-path
          port: 1234
        caBundle: "Ci0tLS0tQk...<base64-encoded PEM bundle>...tLS0K"
...

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    webhookClientConfig:
      service:
        namespace: my-service-namespace
        name: my-service-name
        path: /my-path
        port: 1234
      caBundle: "Ci0tLS0tQk...<base64-encoded PEM bundle>...tLS0K"
...

Webhook request and response

Request

Webhooks are sent a POST request, with Content-Type: application/json, with a ConversionReview API object in the apiextensions.k8s.io API group serialized to JSON as the body.

Webhooks can specify what versions of ConversionReview objects they accept with the conversionReviewVersions field in their CustomResourceDefinition:

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    webhook:
      conversionReviewVersions: ["v1", "v1beta1"]
      ...

conversionReviewVersions is a required field when creating apiextensions.k8s.io/v1 custom resource definitions. Webhooks are required to support at least one ConversionReview version understood by the current and previous API server.

# Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
...
spec:
  ...
  conversion:
    strategy: Webhook
    conversionReviewVersions: ["v1", "v1beta1"]
    ...

If no conversionReviewVersions are specified, the default when creating apiextensions.k8s.io/v1beta1 custom resource definitions is v1beta1.

API servers send the first ConversionReview version in the conversionReviewVersions list they support. If none of the versions in the list are supported by the API server, the custom resource definition will not be allowed to be created. If an API server encounters a conversion webhook configuration that was previously created and does not support any of the ConversionReview versions the API server knows how to send, attempts to call to the webhook will fail.

This example shows the data contained in an ConversionReview object for a request to convert CronTab objects to example.com/v1:

apiextensions.k8s.io/v1
apiextensions.k8s.io/v1beta1

Response

Webhooks respond with and a body containing a with the response tabindex="0" style="background-color:#f8f8f8;-moz-tab-size:4;-o-tab-size:4;tab-size:4">{ "apiVersion": "apiextensions.k8s.io/v1", "kind": "ConversionReview", "request": { # Random uid uniquely identifying this conversion call "uid": "705ab4f5-6393-11e8-b7cc-42010a800002", # The API group and version the objects should be converted to "desiredAPIVersion": "example.com/v1", # The list of objects to convert. # May contain one or more objects, in one or more versions. "objects": [ { "kind": "CronTab", "apiVersion": "example.com/v1beta1", "metadata": { "creationTimestamp": "2019-09-04T14:03:02Z", "name": "local-crontab", "namespace": "default", "resourceVersion": "143", "uid": "3415a7fc-162b-4300-b5da-fd6083580d66" }, "hostPort": "localhost:1234" }, { "kind": "CronTab", "apiVersion": "example.com/v1beta1", "metadata": { "creationTimestamp": "2019-09-03T13:02:01Z", "name": "remote-crontab", "resourceVersion": "12893", "uid": "359a83ec-b575-460d-b553-d859cedde8a0" }, "hostPort": "example.com:2345" } ] } style="color:#bbb"> class="tab-pane" role="tabpanel" aria-labelledby="conversionreview-request-1"> tabindex="0" style="background-color:#f8f8f8;-moz-tab-size:4;-o-tab-size:4;tab-size:4">{ # Deprecated in v1.16 in favor of apiextensions.k8s.io/v1 "apiVersion": "apiextensions.k8s.io/v1beta1", "kind": "ConversionReview", "request": { # Random uid uniquely identifying this conversion call "uid": "705ab4f5-6393-11e8-b7cc-42010a800002", # The API group and version the objects should be converted to "desiredAPIVersion": "example.com/v1", # The list of objects to convert. # May contain one or more objects, in one or more versions. "objects": [ { "kind": "CronTab", "apiVersion": "example.com/v1beta1", "metadata": { "creationTimestamp": "2019-09-04T14:03:02Z", "name": "local-crontab", "namespace": "default", "resourceVersion": "143", "uid": "3415a7fc-162b-4300-b5da-fd6083580d66" }, "hostPort": "localhost:1234" }, { "kind": "CronTab", "apiVersion": "example.com/v1beta1", "metadata": { "creationTimestamp": "2019-09-03T13:02:01Z", "name": "remote-crontab", "resourceVersion": "12893", "uid": "359a83ec-b575-460d-b553-d859cedde8a0" }, "hostPort": "example.com:2345" } ] } style="color:#bbb"> a 200 HTTP status code, Content-Type: application/json, ConversionReview object (in the same version they were sent), stanza populated, serialized to JSON.


If conversion succeeds, a webhook should return a response stanza containing the following fields:

uid, copied from the request.uid sent to the webhook
result, set to {"status":"Success"}
convertedObjects, containing all of the objects from request.objects, converted to request.desiredVersion

Example of a minimal successful response from a webhook:
apiextensions.k8s.io/v1
	  
		apiextensions.k8s.io/v1beta1


{
  "apiVersion": "apiextensions.k8s.io/v1",
  "kind": "ConversionReview",
  "response": {
    # must match <request.uid>
    "uid": "705ab4f5-6393-11e8-b7cc-42010a800002",
    "result": {
      "status": "Success"
    },
    # Objects must match the order of request.objects, and have apiVersion set to <request.desiredAPIVersion>.
    # kind, metadata.uid, metadata.name, and metadata.namespace fields must not be changed by the webhook.
    # metadata.labels and metadata.annotations fields may be changed by the webhook.
    # All other changes to metadata fields by the webhook are ignored.
    "convertedObjects": [
      {
        "kind": "CronTab",
        "apiVersion": "example.com/v1",
        "metadata": {
          "creationTimestamp": "2019-09-04T14:03:02Z",
          "name": "local-crontab",
          "namespace": "default",
          "resourceVersion": "143",
          "uid": "3415a7fc-162b-4300-b5da-fd6083580d66"
        },
        "host": "localhost",
        "port": "1234"
      },
      {
        "kind": "CronTab",
        "apiVersion": "example.com/v1",
        "metadata": {
          "creationTimestamp": "2019-09-03T13:02:01Z",
          "name": "remote-crontab",
          "resourceVersion": "12893",
          "uid": "359a83ec-b575-460d-b553-d859cedde8a0"
        },
        "host": "example.com",
        "port": "2345"
      }
    ]
  }
}

  

{
  # Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
  "apiVersion": "apiextensions.k8s.io/v1beta1",
  "kind": "ConversionReview",
  "response": {
    # must match <request.uid>
    "uid": "705ab4f5-6393-11e8-b7cc-42010a800002",
    "result": {
      "status": "Failed"
    },
    # Objects must match the order of request.objects, and have apiVersion set to <request.desiredAPIVersion>.
    # kind, metadata.uid, metadata.name, and metadata.namespace fields must not be changed by the webhook.
    # metadata.labels and metadata.annotations fields may be changed by the webhook.
    # All other changes to metadata fields by the webhook are ignored.
    "convertedObjects": [
      {
        "kind": "CronTab",
        "apiVersion": "example.com/v1",
        "metadata": {
          "creationTimestamp": "2019-09-04T14:03:02Z",
          "name": "local-crontab",
          "namespace": "default",
          "resourceVersion": "143",
          "uid": "3415a7fc-162b-4300-b5da-fd6083580d66"
        },
        "host": "localhost",
        "port": "1234"
      },
      {
        "kind": "CronTab",
        "apiVersion": "example.com/v1",
        "metadata": {
          "creationTimestamp": "2019-09-03T13:02:01Z",
          "name": "remote-crontab",
          "resourceVersion": "12893",
          "uid": "359a83ec-b575-460d-b553-d859cedde8a0"
        },
        "host": "example.com",
        "port": "2345"
      }
    ]
  }
}


If conversion fails, a webhook should return a response stanza containing the following fields:

uid, copied from the request.uid sent to the webhook
result, set to {"status":"Failed"}


  Warning: Failing conversion can disrupt read and write access to the custom resources,
including the ability to update or delete the resources. Conversion failures
should be avoided whenever possible, and should not be used to enforce validation
constraints (use validation schemas or webhook admission instead).



Example of a response from a webhook indicating a conversion request failed, with an optional message:
apiextensions.k8s.io/v1
	  
		apiextensions.k8s.io/v1beta1


{
  "apiVersion": "apiextensions.k8s.io/v1",
  "kind": "ConversionReview",
  "response": {
    "uid": "<value from request.uid>",
    "result": {
      "status": "Failed",
      "message": "hostPort could not be parsed into a separate host and port"
    }
  }
}

  

{
  # Deprecated in v1.16 in favor of apiextensions.k8s.io/v1
  "apiVersion": "apiextensions.k8s.io/v1beta1",
  "kind": "ConversionReview",
  "response": {
    "uid": "<value from request.uid>",
    "result": {
      "status": "Failed",
      "message": "hostPort could not be parsed into a separate host and port"
    }
  }
}


Writing, reading, and updating versioned CustomResourceDefinition objects
When an object is written, it is persisted at the version designated as the
storage version at the time of the write. If the storage version changes,
existing objects are never converted automatically. However, newly-created
or updated objects are written at the new storage version. It is possible for an
object to have been written at a version that is no longer served.
When you read an object, you specify the version as part of the path. If you
specify a version that is different from the object's persisted version,
Kubernetes returns the object to you at the version you requested, but the
persisted object is neither changed on disk, nor converted in any way
(other than changing the apiVersion string) while serving the request.
You can request an object at any version that is currently served.
If you update an existing object, it is rewritten at the version that is
currently the storage version. This is the only way that objects can change from
one version to another.
To illustrate this, consider the following hypothetical series of events:

The storage version is v1beta1. You create an object. It is persisted in
storage at version v1beta1
You add version v1 to your CustomResourceDefinition and designate it as
the storage version.
You read your object at version v1beta1, then you read the object again at
version v1. Both returned objects are identical except for the apiVersion
field.
You create a new object. It is persisted in storage at version v1. You now
have two objects, one of which is at v1beta1, and the other of which is at
v1.
You update the first object. It is now persisted at version v1 since that
is the current storage version.

Previous storage versions
The API server records each version which has ever been marked as the storage
version in the status field storedVersions. Objects may have been persisted
at any version that has ever been designated as a storage version. No objects
can exist in storage at a version that has never been a storage version.
Upgrade existing objects to a new stored version
When deprecating versions and dropping support, select a storage upgrade
procedure.
Option 1: Use the Storage Version Migrator

Run the storage Version migrator
Remove the old version from the CustomResourceDefinition status.storedVersions field.

Option 2: Manually upgrade the existing objects to a new stored version
The following is an example procedure to upgrade from v1beta1 to v1.

Set v1 as the storage in the CustomResourceDefinition file and apply it
using kubectl. The storedVersions is now v1beta1, v1.
Write an upgrade procedure to list all existing objects and write them with
the same content. This forces the backend to write objects in the current
storage version, which is v1.
Remove v1beta1 from the CustomResourceDefinition status.storedVersions field.


  Note: The kubectl tool currently cannot be used to edit or patch the status subresource on a CRD: see the Kubectl Subresource Support KEP for more details.
The easier way to patch the status subresource from the CLI is directly interacting with the API server using the curl tool, in this example:
kubectl proxy &
curl --header "Content-Type: application/json-patch+json" \
  --request PATCH http://localhost:8001/apis/apiextensions.k8s.io/v1/customresourcedefinitions/<your CRD name here>/status \
  --data '[{"op": "replace", "path": "/status/storedVersions", "value":["v1"]}]'





    
	
  

    
	
  
    
    
	
    


    
	3 - Set up an Extension API Server
    
	
Setting up an extension API server to work with the aggregation layer allows the Kubernetes apiserver to be extended with additional APIs, which are not part of the core Kubernetes APIs.
Before you begin
You need to have a Kubernetes cluster, and the kubectl command-line tool must
be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a
cluster, you can create one by using
minikube
or you can use one of these Kubernetes playgrounds:

Katacoda
Play with Kubernetes

 
 To check the version, enter kubectl version.


You must configure the aggregation layer and enable the apiserver flags.


Setup an extension api-server to work with the aggregation layer
The following steps describe how to set up an extension-apiserver at a high level. These steps apply regardless if you're using YAML configs or using APIs. An attempt is made to specifically identify any differences between the two. For a concrete example of how they can be implemented using YAML configs, you can look at the sample-apiserver in the Kubernetes repo.
Alternatively, you can use an existing 3rd party solution, such as apiserver-builder, which should generate a skeleton and automate all of the following steps for you.

Make sure the APIService API is enabled (check --runtime-config). It should be on by default, unless it's been deliberately turned off in your cluster.
You may need to make an RBAC rule allowing you to add APIService objects, or get your cluster administrator to make one. (Since API extensions affect the entire cluster, it is not recommended to do testing/development/debug of an API extension in a live cluster.)
Create the Kubernetes namespace you want to run your extension api-service in.
Create/get a CA cert to be used to sign the server cert the extension api-server uses for HTTPS.
Create a server cert/key for the api-server to use for HTTPS. This cert should be signed by the above CA. It should also have a CN of the Kube DNS name. This is derived from the Kubernetes service and be of the form <service name>.<service name namespace>.svc
Create a Kubernetes secret with the server cert/key in your namespace.
Create a Kubernetes deployment for the extension api-server and make sure you are loading the secret as a volume. It should contain a reference to a working image of your extension api-server. The deployment should also be in your namespace.
Make sure that your extension-apiserver loads those certs from that volume and that they are used in the HTTPS handshake.
Create a Kubernetes service account in your namespace.
Create a Kubernetes cluster role for the operations you want to allow on your resources.
Create a Kubernetes cluster role binding from the service account in your namespace to the cluster role you created.
Create a Kubernetes cluster role binding from the service account in your namespace to the system:auth-delegator cluster role to delegate auth decisions to the Kubernetes core API server.
Create a Kubernetes role binding from the service account in your namespace to the extension-apiserver-authentication-reader role. This allows your extension api-server to access the extension-apiserver-authentication configmap.
Create a Kubernetes apiservice. The CA cert above should be base64 encoded, stripped of new lines and used as the spec.caBundle in the apiservice. This should not be namespaced. If using the kube-aggregator API, only pass in the PEM encoded CA bundle because the base 64 encoding is done for you.
Use kubectl to get your resource. When run, kubectl should return "No resources found.". This message
indicates that everything worked but you currently have no objects of that resource type created.

What's next

Walk through the steps to configure the API aggregation layer and enable the apiserver flags.
For a high level overview, see Extending the Kubernetes API with the aggregation layer.
Learn how to Extend the Kubernetes API using Custom Resource Definitions.






    
	
  
    
    
	
    


    
	4 - Configure Multiple Schedulers
    
	
Kubernetes ships with a default scheduler that is described
here.
If the default scheduler does not suit your needs you can implement your own scheduler.
Moreover, you can even run multiple schedulers simultaneously alongside the default
scheduler and instruct Kubernetes what scheduler to use for each of your pods. Let's
learn how to run multiple schedulers in Kubernetes with an example.
A detailed description of how to implement a scheduler is outside the scope of this
document. Please refer to the kube-scheduler implementation in
pkg/scheduler
in the Kubernetes source directory for a canonical example.
Before you begin
You need to have a Kubernetes cluster, and the kubectl command-line tool must
be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a
cluster, you can create one by using
minikube
or you can use one of these Kubernetes playgrounds:

Katacoda
Play with Kubernetes

 
 To check the version, enter kubectl version.


Package the scheduler
Package your scheduler binary into a container image. For the purposes of this example,
you can use the default scheduler (kube-scheduler) as your second scheduler.
Clone the Kubernetes source code from GitHub
and build the source.
git clone https://github.com/kubernetes/kubernetes.git
cd kubernetes
make
Create a container image containing the kube-scheduler binary. Here is the Dockerfile
to build the image:
FROM busybox
ADD ./_output/local/bin/linux/amd64/kube-scheduler /usr/local/bin/kube-scheduler
Save the file as Dockerfile, build the image and push it to a registry. This example
pushes the image to
Google Container Registry (GCR).
For more details, please read the GCR
documentation.
docker build -t gcr.io/my-gcp-project/my-kube-scheduler:1.0 .
gcloud docker -- push gcr.io/my-gcp-project/my-kube-scheduler:1.0
Define a Kubernetes Deployment for the scheduler
Now that you have your scheduler in a container image, create a pod
configuration for it and run it in your Kubernetes cluster. But instead of creating a pod
directly in the cluster, you can use a Deployment
for this example. A Deployment manages a
Replica Set which in turn manages the pods,
thereby making the scheduler resilient to failures. Here is the deployment
config. Save it as my-scheduler.yaml:


 














    
    admin/sched/my-scheduler.yaml
    
    
    
    
    
    apiVersion: v1
kind: ServiceAccount
metadata:
  name: my-scheduler
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: my-scheduler-as-kube-scheduler
subjects:
- kind: ServiceAccount
  name: my-scheduler
  namespace: kube-system
roleRef:
  kind: ClusterRole
  name: system:kube-scheduler
  apiGroup: rbac.authorization.k8s.io
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: my-scheduler-as-volume-scheduler
subjects:
- kind: ServiceAccount
  name: my-scheduler
  namespace: kube-system
roleRef:
  kind: ClusterRole
  name: system:volume-scheduler
  apiGroup: rbac.authorization.k8s.io
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: my-scheduler-config
  namespace: kube-system
data:
  my-scheduler-config.yaml: |
    apiVersion: kubescheduler.config.k8s.io/v1beta2
    kind: KubeSchedulerConfiguration
    profiles:
      - schedulerName: my-scheduler
    leaderElection:
      leaderElect: false    
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    component: scheduler
    tier: control-plane
  name: my-scheduler
  namespace: kube-system
spec:
  selector:
    matchLabels:
      component: scheduler
      tier: control-plane
  replicas: 1
  template:
    metadata:
      labels:
        component: scheduler
        tier: control-plane
        version: second
    spec:
      serviceAccountName: my-scheduler
      containers:
      - command:
        - /usr/local/bin/kube-scheduler
        - --config=/etc/kubernetes/my-scheduler/my-scheduler-config.yaml
        image: gcr.io/my-gcp-project/my-kube-scheduler:1.0
        livenessProbe:
          httpGet:
            path: /healthz
            port: 10259
            scheme: HTTPS
          initialDelaySeconds: 15
        name: kube-second-scheduler
        readinessProbe:
          httpGet:
            path: /healthz
            port: 10259
            scheme: HTTPS
        resources:
          requests:
            cpu: '0.1'
        securityContext:
          privileged: false
        volumeMounts:
          - name: config-volume
            mountPath: /etc/kubernetes/my-scheduler
      hostNetwork: false
      hostPID: false
      volumes:
        - name: config-volume
          configMap:
            name: my-scheduler-config

    



In the above manifest, you use a KubeSchedulerConfiguration
to customize the behavior of your scheduler implementation. This configuration has been passed to
the kube-scheduler during initialization with the --config option. The my-scheduler-config ConfigMap stores the configuration file. The Pod of themy-scheduler Deployment mounts the my-scheduler-config ConfigMap as a volume.
In the aforementioned Scheduler Configuration, your scheduler implementation is represented via
a KubeSchedulerProfile.

  Note: To determine if a scheduler is responsible for scheduling a specific Pod, the spec.schedulerName field in a
PodTemplate or Pod manifest must match the schedulerName field of the KubeSchedulerProfile.
All schedulers running in the cluster must have unique names.

Also, note that you create a dedicated service account my-scheduler and bind the ClusterRole
system:kube-scheduler to it so that it can acquire the same privileges as kube-scheduler.
Please see the
kube-scheduler documentation for
detailed description of other command line arguments and
Scheduler Configuration reference for
detailed description of other customizable kube-scheduler configurations.
Run the second scheduler in the cluster
In order to run your scheduler in a Kubernetes cluster, create the deployment
specified in the config above in a Kubernetes cluster:
kubectl create -f my-scheduler.yaml
Verify that the scheduler pod is running:
kubectl get pods --namespace=kube-system
NAME                                           READY     STATUS    RESTARTS   AGE
....
my-scheduler-lnf4s-4744f                       1/1       Running   0          2m
...
You should see a "Running" my-scheduler pod, in addition to the default kube-scheduler
pod in this list.
Enable leader election
To run multiple-scheduler with leader election enabled, you must do the following:
Update the following fields for the KubeSchedulerConfiguration in the my-scheduler-config ConfigMap in your YAML file:

leaderElection.leaderElect to true
leaderElection.resourceNamespace to <lock-object-namespace>
leaderElection.resourceName to <lock-object-name>


  Note: The control plane creates the lock objects for you, but the namespace must already exist.
You can use the kube-system namespace.

If RBAC is enabled on your cluster, you must update the system:kube-scheduler cluster role.
Add your scheduler name to the resourceNames of the rule applied for endpoints and leases resources, as in the following example:
kubectl edit clusterrole system:kube-scheduler


 














    
    admin/sched/clusterrole.yaml
    
    
    
    
    
    apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:kube-scheduler
rules:
  - apiGroups:
      - coordination.k8s.io
    resources:
      - leases
    verbs:
      - create
  - apiGroups:
      - coordination.k8s.io
    resourceNames:
      - kube-scheduler
      - my-scheduler
    resources:
      - leases
    verbs:
      - get
      - update
  - apiGroups:
      - ""
    resourceNames:
      - kube-scheduler
      - my-scheduler
    resources:
      - endpoints
    verbs:
      - delete
      - get
      - patch
      - update

    



Specify schedulers for pods
Now that your second scheduler is running, create some pods, and direct them
to be scheduled by either the default scheduler or the one you deployed.
In order to schedule a given pod using a specific scheduler, specify the name of the
scheduler in that pod spec. Let's look at three examples.


Pod spec without any scheduler name


 














    
    admin/sched/pod1.yaml
    
    
    
    
    
    apiVersion: v1
kind: Pod
metadata:
  name: no-annotation
  labels:
    name: multischeduler-example
spec:
  containers:
  - name: pod-with-no-annotation-container
    image: k8s.gcr.io/pause:2.0
    



When no scheduler name is supplied, the pod is automatically scheduled using the
default-scheduler.
Save this file as pod1.yaml and submit it to the Kubernetes cluster.
kubectl create -f pod1.yaml


Pod spec with default-scheduler


 














    
    admin/sched/pod2.yaml
    
    
    
    
    
    apiVersion: v1
kind: Pod
metadata:
  name: annotation-default-scheduler
  labels:
    name: multischeduler-example
spec:
  schedulerName: default-scheduler
  containers:
  - name: pod-with-default-annotation-container
    image: k8s.gcr.io/pause:2.0

    



A scheduler is specified by supplying the scheduler name as a value to spec.schedulerName. In this case, we supply the name of the
default scheduler which is default-scheduler.
Save this file as pod2.yaml and submit it to the Kubernetes cluster.
kubectl create -f pod2.yaml


Pod spec with my-scheduler


 














    
    admin/sched/pod3.yaml
    
    
    
    
    
    apiVersion: v1
kind: Pod
metadata:
  name: annotation-second-scheduler
  labels:
    name: multischeduler-example
spec:
  schedulerName: my-scheduler
  containers:
  - name: pod-with-second-annotation-container
    image: k8s.gcr.io/pause:2.0

    



In this case, we specify that this pod should be scheduled using the scheduler that we
deployed - my-scheduler. Note that the value of spec.schedulerName should match the name supplied for the scheduler
in the schedulerName field of the mapping KubeSchedulerProfile.
Save this file as pod3.yaml and submit it to the Kubernetes cluster.
kubectl create -f pod3.yaml
Verify that all three pods are running.
kubectl get pods



Verifying that the pods were scheduled using the desired schedulers
In order to make it easier to work through these examples, we did not verify that the
pods were actually scheduled using the desired schedulers. We can verify that by
changing the order of pod and deployment config submissions above. If we submit all the
pod configs to a Kubernetes cluster before submitting the scheduler deployment config,
we see that the pod annotation-second-scheduler remains in "Pending" state forever
while the other two pods get scheduled. Once we submit the scheduler deployment config
and our new scheduler starts running, the annotation-second-scheduler pod gets
scheduled as well.
Alternatively, you can look at the "Scheduled" entries in the event logs to
verify that the pods were scheduled by the desired schedulers.
kubectl get events
You can also use a custom scheduler configuration
or a custom container image for the cluster's main scheduler by modifying its static pod manifest
on the relevant control plane nodes.





    
	
  
    
    
	
    


    
	5 - Use an HTTP Proxy to Access the Kubernetes API
    
	
This page shows how to use an HTTP proxy to access the Kubernetes API.
Before you begin
You need to have a Kubernetes cluster, and the kubectl command-line tool must
be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a
cluster, you can create one by using
minikube
or you can use one of these Kubernetes playgrounds:

Katacoda
Play with Kubernetes

 
 To check the version, enter kubectl version.

If you do not already have an application running in your cluster, start
a Hello world application by entering this command:
kubectl create deployment node-hello --image=gcr.io/google-samples/node-hello:1.0 --port=8080

Using kubectl to start a proxy server
This command starts a proxy to the Kubernetes API server:
kubectl proxy --port=8080

Exploring the Kubernetes API
When the proxy server is running, you can explore the API using curl, wget,
or a browser.
Get the API versions:
curl http://localhost:8080/api/

The output should look similar to this:
{
  "kind": "APIVersions",
  "versions": [
    "v1"
  ],
  "serverAddressByClientCIDRs": [
    {
      "clientCIDR": "0.0.0.0/0",
      "serverAddress": "10.0.2.15:8443"
    }
  ]
}

Get a list of pods:
curl http://localhost:8080/api/v1/namespaces/default/pods

The output should look similar to this:
{
  "kind": "PodList",
  "apiVersion": "v1",
  "metadata": {
    "resourceVersion": "33074"
  },
  "items": [
    {
      "metadata": {
        "name": "kubernetes-bootcamp-2321272333-ix8pt",
        "generateName": "kubernetes-bootcamp-2321272333-",
        "namespace": "default",
        "uid": "ba21457c-6b1d-11e6-85f7-1ef9f1dab92b",
        "resourceVersion": "33003",
        "creationTimestamp": "2016-08-25T23:43:30Z",
        "labels": {
          "pod-template-hash": "2321272333",
          "run": "kubernetes-bootcamp"
        },
        ...
}

What's next
Learn more about kubectl proxy.





    
	
  
    
    
	
    


    
	6 - Set up Konnectivity service
    
	
The Konnectivity service provides a TCP level proxy for the control plane to cluster
communication.
Before you begin
You need to have a Kubernetes cluster, and the kubectl command-line tool must
be configured to communicate with your cluster. It is recommended to run this
tutorial on a cluster with at least two nodes that are not acting as control
plane hosts. If you do not already have a cluster, you can create one by using
minikube.

Configure the Konnectivity service
The following steps require an egress configuration, for example:


 














    
    admin/konnectivity/egress-selector-configuration.yaml
    
    
    
    
    
    apiVersion: apiserver.k8s.io/v1beta1
kind: EgressSelectorConfiguration
egressSelections:
# Since we want to control the egress traffic to the cluster, we use the
# "cluster" as the name. Other supported values are "etcd", and "master".
- name: cluster
  connection:
    # This controls the protocol between the API Server and the Konnectivity
    # server. Supported values are "GRPC" and "HTTPConnect". There is no
    # end user visible difference between the two modes. You need to set the
    # Konnectivity server to work in the same mode.
    proxyProtocol: GRPC
    transport:
      # This controls what transport the API Server uses to communicate with the
      # Konnectivity server. UDS is recommended if the Konnectivity server
      # locates on the same machine as the API Server. You need to configure the
      # Konnectivity server to listen on the same UDS socket.
      # The other supported transport is "tcp". You will need to set up TLS 
      # config to secure the TCP transport.
      uds:
        udsName: /etc/kubernetes/konnectivity-server/konnectivity-server.socket

    



You need to configure the API Server to use the Konnectivity service
and direct the network traffic to the cluster nodes:

Make sure that
Service Account Token Volume Projection
feature enabled in your cluster. It is enabled by default since Kubernetes v1.20.
Create an egress configuration file such as admin/konnectivity/egress-selector-configuration.yaml.
Set the --egress-selector-config-file flag of the API Server to the path of
your API Server egress configuration file.
If you use UDS connection, add volumes config to the kube-apiserver:
spec:
  containers:
    volumeMounts:
    - name: konnectivity-uds
      mountPath: /etc/kubernetes/konnectivity-server
      readOnly: false
  volumes:
  - name: konnectivity-uds
    hostPath:
      path: /etc/kubernetes/konnectivity-server
      type: DirectoryOrCreate


Generate or obtain a certificate and kubeconfig for konnectivity-server.
For example, you can use the OpenSSL command line tool to issue a X.509 certificate,
using the cluster CA certificate /etc/kubernetes/pki/ca.crt from a control-plane host.
openssl req -subj "/CN=system:konnectivity-server" -new -newkey rsa:2048 -nodes -out konnectivity.csr -keyout konnectivity.key -out konnectivity.csr
openssl x509 -req -in konnectivity.csr -CA /etc/kubernetes/pki/ca.crt -CAkey /etc/kubernetes/pki/ca.key -CAcreateserial -out konnectivity.crt -days 375 -sha256
SERVER=$(kubectl config view -o jsonpath='{.clusters..server}')
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-credentials system:konnectivity-server --client-certificate konnectivity.crt --client-key konnectivity.key --embed-certs=true
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-cluster kubernetes --server "$SERVER" --certificate-authority /etc/kubernetes/pki/ca.crt --embed-certs=true
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-context system:konnectivity-server@kubernetes --cluster kubernetes --user system:konnectivity-server
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config use-context system:konnectivity-server@kubernetes
rm -f konnectivity.crt konnectivity.key konnectivity.csr
Next, you need to deploy the Konnectivity server and agents.
kubernetes-sigs/apiserver-network-proxy
is a reference implementation.
Deploy the Konnectivity server on your control plane node. The provided
konnectivity-server.yaml manifest assumes
that the Kubernetes components are deployed as a static Pod in your cluster. If not, you can deploy the Konnectivity
server as a DaemonSet.


 














    
    admin/konnectivity/konnectivity-server.yaml
    
    
    
    
    
    apiVersion: v1
kind: Pod
metadata:
  name: konnectivity-server
  namespace: kube-system
spec:
  priorityClassName: system-cluster-critical
  hostNetwork: true
  containers:
  - name: konnectivity-server-container
    image: us.gcr.io/k8s-artifacts-prod/kas-network-proxy/proxy-server:v0.0.16
    command: ["/proxy-server"]
    args: [
            "--logtostderr=true",
            # This needs to be consistent with the value set in egressSelectorConfiguration.
            "--uds-name=/etc/kubernetes/konnectivity-server/konnectivity-server.socket",
            # The following two lines assume the Konnectivity server is
            # deployed on the same machine as the apiserver, and the certs and
            # key of the API Server are at the specified location.
            "--cluster-cert=/etc/kubernetes/pki/apiserver.crt",
            "--cluster-key=/etc/kubernetes/pki/apiserver.key",
            # This needs to be consistent with the value set in egressSelectorConfiguration.
            "--mode=grpc",
            "--server-port=0",
            "--agent-port=8132",
            "--admin-port=8133",
            "--health-port=8134",
            "--agent-namespace=kube-system",
            "--agent-service-account=konnectivity-agent",
            "--kubeconfig=/etc/kubernetes/konnectivity-server.conf",
            "--authentication-audience=system:konnectivity-server"
            ]
    livenessProbe:
      httpGet:
        scheme: HTTP
        host: 127.0.0.1
        port: 8134
        path: /healthz
      initialDelaySeconds: 30
      timeoutSeconds: 60
    ports:
    - name: agentport
      containerPort: 8132
      hostPort: 8132
    - name: adminport
      containerPort: 8133
      hostPort: 8133
    - name: healthport
      containerPort: 8134
      hostPort: 8134
    volumeMounts:
    - name: k8s-certs
      mountPath: /etc/kubernetes/pki
      readOnly: true
    - name: kubeconfig
      mountPath: /etc/kubernetes/konnectivity-server.conf
      readOnly: true
    - name: konnectivity-uds
      mountPath: /etc/kubernetes/konnectivity-server
      readOnly: false
  volumes:
  - name: k8s-certs
    hostPath:
      path: /etc/kubernetes/pki
  - name: kubeconfig
    hostPath:
      path: /etc/kubernetes/konnectivity-server.conf
      type: FileOrCreate
  - name: konnectivity-uds
    hostPath:
      path: /etc/kubernetes/konnectivity-server
      type: DirectoryOrCreate

    



Then deploy the Konnectivity agents in your cluster:


 














    
    admin/konnectivity/konnectivity-agent.yaml
    
    
    
    
    
    apiVersion: apps/v1
# Alternatively, you can deploy the agents as Deployments. It is not necessary
# to have an agent on each node.
kind: DaemonSet
metadata:
  labels:
    addonmanager.kubernetes.io/mode: Reconcile
    k8s-app: konnectivity-agent
  namespace: kube-system
  name: konnectivity-agent
spec:
  selector:
    matchLabels:
      k8s-app: konnectivity-agent
  template:
    metadata:
      labels:
        k8s-app: konnectivity-agent
    spec:
      priorityClassName: system-cluster-critical
      tolerations:
        - key: "CriticalAddonsOnly"
          operator: "Exists"
      containers:
        - image: us.gcr.io/k8s-artifacts-prod/kas-network-proxy/proxy-agent:v0.0.16
          name: konnectivity-agent
          command: ["/proxy-agent"]
          args: [
                  "--logtostderr=true",
                  "--ca-cert=/var/run/secrets/kubernetes.io/serviceaccount/ca.crt",
                  # Since the konnectivity server runs with hostNetwork=true,
                  # this is the IP address of the master machine.
                  "--proxy-server-host=35.225.206.7",
                  "--proxy-server-port=8132",
                  "--admin-server-port=8133",
                  "--health-server-port=8134",
                  "--service-account-token-path=/var/run/secrets/tokens/konnectivity-agent-token"
                  ]
          volumeMounts:
            - mountPath: /var/run/secrets/tokens
              name: konnectivity-agent-token
          livenessProbe:
            httpGet:
              port: 8134
              path: /healthz
            initialDelaySeconds: 15
            timeoutSeconds: 15
      serviceAccountName: konnectivity-agent
      volumes:
        - name: konnectivity-agent-token
          projected:
            sources:
              - serviceAccountToken:
                  path: konnectivity-agent-token
                  audience: system:konnectivity-server

    



Last, if RBAC is enabled in your cluster, create the relevant RBAC rules:


 














    
    admin/konnectivity/konnectivity-rbac.yaml
    
    
    
    
    
    apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: system:konnectivity-server
  labels:
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:auth-delegator
subjects:
  - apiGroup: rbac.authorization.k8s.io
    kind: User
    name: system:konnectivity-server
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: konnectivity-agent
  namespace: kube-system
  labels:
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile

Extend Kubernetes

1 - Configure the Aggregation Layer

Before you begin

Authentication Flow

Kubernetes Apiserver Authentication and Authorization

Kubernetes Apiserver Proxies the Request

Kubernetes Apiserver Client Authentication

Original Request Username and Group

Extension Apiserver Authenticates the Request

Extension Apiserver Authorizes the Request

Extension Apiserver Executes

Enable Kubernetes Apiserver flags

CA Reusage and Conflicts

Register APIService objects

Contacting the extension apiserver

What's next

2 - Use Custom Resources

2.1 - Extend the Kubernetes API with CustomResourceDefinitions

Before you begin

Create a CustomResourceDefinition

Create custom objects

Delete a CustomResourceDefinition

Specifying a structural schema

Field pruning

Controlling pruning

IntOrString

RawExtension

Serving multiple versions of a CRD

Advanced topics

Finalizers

Validation

Validation rules

Defaulting

Defaulting and Nullable

Publish Validation Schema in OpenAPI v2

Additional printer columns

Priority

Type

Format

Subresources

Status subresource

Scale subresource

Categories

What's next

2.2 - Versions in CustomResourceDefinitions

Before you begin

Overview

Specify multiple versions

Version priority

Version deprecation

Webhook conversion

Write a conversion webhook server

Permissible mutations

Deploy the conversion webhook service

Configure CustomResourceDefinition to use conversion webhooks

Contacting the webhook

URL

Service Reference

Webhook request and response

Request

Response

Writing, reading, and updating versioned CustomResourceDefinition objects

Previous storage versions

Upgrade existing objects to a new stored version

3 - Set up an Extension API Server

Before you begin

Setup an extension api-server to work with the aggregation layer

What's next

4 - Configure Multiple Schedulers

Before you begin

Package the scheduler

Define a Kubernetes Deployment for the scheduler

Run the second scheduler in the cluster

Enable leader election

Specify schedulers for pods

Verifying that the pods were scheduled using the desired schedulers

5 - Use an HTTP Proxy to Access the Kubernetes API

Before you begin

Using kubectl to start a proxy server

Exploring the Kubernetes API